Best Table Saw Miter Gauge – Reviews & Top Picks 2021

When it comes to woodworking, a miter gauge is one of the most important tools you’re going to need. What is a miter gauge? It is a tool that helps to measure angles to make “miter cuts”, and is found with almost every table saw you purchase. However, the ones that tag along with a table saw usually have tons of errors and faults. Thus, we’re here to help you find the best table saw miter gauge out there, with a proper round up and a buyer’s guide as well!

Best Table Saw Miter Gauge Comparison Table

Product Picture

Product Name




INCRA Miter1000/HD Miter Gauge

Weight: 7.63 pounds
Stops: 180 stops


Kreg KMS7102 Table Saw Precision Miter Gauge System

Weight: 6.0 pounds
Stops: 5 special stops


Incra MITERV27 Miter V27 Miter Gauge

Weight: 2.71 pounds
Stops: 27 stops


Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence

Weight: 31.4 pounds
Stops: 364 stops


POWERTEC 71005 Deluxe Table Saw Miter Gauge

Weight: 3.3 pounds
Stops: 5 stops with custom options


Now that you know our top 5 choices for miter gauges, let’s look into what gets them on to our list, and why you should consider purchasing them!

5 Best Miter Gauges Reviews

Incra Miter 1000, Best Table Saw Miter Gauge

Our first and top rated miter gauge is a product from Incra and it is the Incra miter 1000. This is our top pick for table saw miter gauges, and we definitely think it’ll easily get the job done for you. Incra is also a great brand, so you can be sure of the overall quality of the tools they provide. 

While the Incra miter 1000 may seem to be oddly shaped, you can count on the quality of its heavy duty build. It is very durable and will last you for ages. Not only does it work for a long time, but it works exceptionally well. It normally comes at 18 inches, but can be extended up till 31 inches in length to help work with longer pieces. As for its accuracy, it has a 180 degree angle stops, one at every 1 degree angle, with special stops at 22.5 degrees. This allows you a wide variety of cuts, and will ensure you get the exact cuts you want. This is made better due to it also being a laser cut miter gauge, allowing you to have even more faith in its performance. The design of this miter gauge will ensure it fits in flush to your table saw’s miter slot, and gives you optimal performance.

Overall, the Incra Miter 1000 will provide you the best performance, and we definitely think it is the one to go for. It definitely has a few drawbacks, one being the odd shape it has, which makes it quite difficult for new woodworkers to come to grips with. The other drawback is that it can tend to flex a little bit when it is extended to the maximum capacity. It also comes in at a relatively high price, but will definitely deliver. These are all minor issues that rarely ever cause any harm, and we’re sure you’ll love this product!

  • Very durable, with heavy duty build
  • Very precise, with 1 degree increments and laser cut build
  • Can extend from 18 inches to 31 inches
  • Quality of materials are very high
  • Can flex at max length
  • Is confusing for beginners to use
  • Expensive

Kreg KMS7102, Table Saw Miter Gauge

We have another great table saw miter gauge for you in the form of the Kreg KMS7102! This miter gauge will come in with a lower price tag than that of the Incra Miter 1000, and still provide some amazing features. One of the biggest plus points of this miter gauge is that it is already calibrated when shipped, and ready to provide you professional level measurements for any job you do.

The Kreg KMS7102 also has more special angle stops than the Incra Miter 1000, at 0, 10, 22.5, 30 and 45 degree angles. That offers you quite a bit of versatility when it comes to making your cuts. It is also made of aluminium, and is designed to fit in very well to your table saw’s miter slot. While being very accurate, it also provides an exceptional level of cuts, to ensure its second spot.

With the Kreg KMS7102 being so great, why is it at the second spot on this list? Well, while it has some great features, the length of the gauge’s fence let’s it down. It can only be extended up to the length of 24 inches, which will make you struggle to cut pieces longer than 30 inches in length. Not to mention, it has an instruction manual that users have claimed is quite difficult to come to grips with. However, at a lower price, you definitely have to consider the Kreg KMS7102 to be a contender for the best miter gauge for table saws.

  • Comes shipped with proper calibrations made
  • Is very precise and accurate
  • Has 5 special stops
  • Is durable and made of aluminium
  • Cheaper than the Incra Miter 1000
  • Only extends till 24 inches
  • Confusing instruction manual

Incra Miter V27, Best Budget Table Saw Miter Gauge

When it comes to our third spot, we have given to the Incra Miter V27, which is the best budget table saw miter gauge out there. That is our first point of attraction towards it. While being so cheap, it still provides a great range and versatility for making cuts, with an inclusion of 27 angle stops on the gauge. This is one of the best choices for newcomers, or people who want to opt for a cheaper model.

Other than being cheap and precise, the Incra Miter V27 is also very durable and will last you for quite a while. You can easily fit it with your table saw, thanks to the universal mounting bracket. One thing we’ve noticed is that both of the other gauges had a complex and bulky build to them, whereas the Incra Miter V27 is very compact and quite simple and easy to understand. This is why it ranks as the best for new users as well.

Overall, the Incra Miter V27 is a great option for anyone looking for a miter gauge. However, with its cheap price comes a cost. You’ll probably have to look for a fence or make your very own fence as it does not come with an inbuilt one. Also, while it is precise and accurate, it pales in comparison to the high end models and their accuracy. However, for someone on a budget and/or new to this tool, this is a great model to look into as it will deliver!

  • Very cheap and affordable
  • Simple design
  • Compact design
  • Has 27 special stops
  • Universal mounting bracket
  • You’ll need to purchase or make a new fence
  • Isn’t as accurate as premium miter gauges

Incra Miter 5000, Table Saw Fence

Incra has really held this list, and comes in with the fourth product, which is the Incra Miter 5000. This miter gauge is overall an amazing tool, and comes with other accessories that compliment it. Now, this does mean that this miter gauge is more complex and bulky to use compared to the ones we’ve already classed as ‘slightly bulky’. That is partly the reason why this isn’t at the top of the list.

However, the Incra Miter 5000 has quite a few perks. The first one is that it also has a telescoping fence that can extend the fence from 36 inches to 64 inches. That is a great range, and you’ll easily be able to cut very long pieces of wood with ease! This goes very well with the 364 angle stops that you receive which increment at every 1/2 degree angles. You’ll receive an impeccably accurate miter gauge, and it helps that it also comes with a sled. Usually people make their own jigs, but to receive one with your miter gauge is a nice touch. This will allow you to ensure you get great accuracy and precision with your cuts.

Overall, the Incra Miter 5000 is an exceptional miter gauge, but does have a couple of drawbacks. It comes with nylon washers that help the gauge to fit in flush with the miter slot, however, they tend to wear out fast which effectively makes the miter gauge loose and inaccurate. At that price, it becomes quite an unnecessary burden. If you’re looking to cut wider pieces, at a certain point the number of washers in contact with the pieces aren’t enough, which also hampers the quality and effectiveness of your miter gauge. While these problems can be rare, they are quite problematic and at its price, not really worth the trouble.

  • Very precise and accurate, with 364 angle stops at every 1/2 degree angle increment
  • Comes with a sled
  • Extends from 36 inches to 64 inches
  • Will wear out and not fit properly in the miter slot
  • Larger pieces will reduce its accuracy and effectiveness

Powertec 71005, Table Saw Miter Gauge

Our last product is from Powertec, and it is the Powertec 71005 miter gauge. The biggest perk for this product is that it is our cheapest option on the list, and is within the price range of most, if not all woodworkers. However, it definitely isn’t close to being the best miter gauge out there.

The Powertec 71005 has many angle stops that are commonly used with table saws. This allows you some versatility with this miter gauge. You can ensure yourself to get good cuts. It is also a very ergonomic miter gauge, as it has different features that allow for the user to have comfort when using it. One of them is the holding point, which provides stability as well as comfort. 

While the Powertec 71005 is a very cheap model, and very usable for amateurs, it definitely doesn’t come anywhere near the top. The accuracy and precision of its cuts are not good, sometimes being inaccurate to 1 degree angles. It also lacks quality as the measurements are painted on to the surface, and is likely to come off soon. This will make the gauge unusable even before it has lost its actual quality.

  • Very cheap
  • Is quite easy to use for amateurs
  • Is quite ergonomic in its design
  • Can be very inaccurate
  • Measurements might wear off sooner than device’s lifespan

A Buyer’s Guide for Miter Gauges

When it comes to purchasing miter gauges, it is key that you have all the correct information to make sure you get the best deal for yourself. We’re here to help you know what information you should be on the lookout for!

Length of Fence

As you can see from our table saw miter gauge reviews, we focused on the length of the fences a lot. One of the primary factors in determining the size of the wood pieces you can cut, is the fence. The fences on table saws are used to hold up the pieces against them for support and to ensure they are parallel to get straight cuts. Thus, you want to ensure your miter gauge has a long fence to allow you to cut the pieces you need!

There are tons of fences out there for table saws, and you should definitely look into the best fence for your table saw if you need one!

Durability of Miter Gauge

One of the biggest things to know about anything is its durability. You don’t want to splash your cash on an item that doesn’t have longevity. When it comes to your miter gauge, you need to know the material that it is built out of, and the brand of the miter gauge. Brands play a large role in the quality of a product, as bigger names put a lot more into these products. Thus, you should always ensure the miter gauge you want can withstand the work that you will do!

Angle Stops

We’ve mentioned the angle stops on the miter gauges we have reviewed, and that is because they come in very handy when you’re using table saws. When you have to make repetitive cuts, having angle stops will massively reduce the time you waste and make your work much more efficient. It is very important for you to always keep an eye on how versatile the miter gauge you’re acquiring is.


Price is a factor everyone has to keep an eye on, for obvious reasons. However, when you’re buying a miter gauge, an expensive product doesn’t necessarily equate to the best product. Whatever work you do, will be the most important factor in determining your need for a specific miter gauge. Therefore, always look in-depth into miter gauges before you spend a hefty amount for features you won’t even need!


  • Are miter gauges universal?

    Not all miter gauges are universal, but a lot nowadays are built to be universal. The universal factor on miter gauges is determined by them being compatible with a few different miter slot types and different brands of saws. You can even see some examples of universal miter gauges in our list.

  • How do you make a miter gauge fence?

    In case your saw might need an added fence to provide you the best cuts, there’s an easy way to make one for yourself. You can place a piece of wood against the miter gauge you’re using, and then drill it down. Once that’s done, you can just hold your cutting pieces against the fence, and it’ll help keep your cuts straight.

  • How do you use a miter gauge?

    Depending on the miter gauge you’re using, move or slide it to the desired angle. Once you’ve done that, mark that down with a pencil and tilt your blade to the angle. Whether you’re making a miter cut or a crosscut, it’s quite easy to maneuver your miter gauge.

The Takeaway

We hope you gained a lot of insight from us delving into table saw miter gauges! In our opinion, the best table saw miter gauge is the Incra Miter 1000! Based on all the factors and general usage of the miter gauge, we feel it definitely should have the top spot. It has a good heavy duty build, making it a durable product. On top of that, it has a lot of angle stops to make it accurate, and can extend quite a long distance to be able to cut long pieces of wood. It may be a bit pricey, but it definitely has the necessary features and good quality to accompany it. We hope you’ve found the best choice for you, and come to a great buy!

Leave a Comment