Best 10 inch Miter Saw Blade in 2021- Expert’s Guide & Reviews

Whether you’re a recreational woodworker or made it a career, miter saws are an essential tool. Ten-inch miter saw blades cut through hard and softwood, making it a popular tool for many woodworking artisans.

With high popularity comes numerous options on the market to choose from. Keep reading to learn about our favorite 10-inch miter saw blades that you can find online today.

Best 10-inch Miter Saw Blade Comparison Table

[wptb id="3930" not found ]

Top 10 Best 10-inch Miter Saw Blade Reviews

DEWALT 10-Inch Miter Table Saw Blade, Combo Pack

DEWALT’s 10-inch miter saw combo pack includes a 60- and 32-tooth blade for general use. Made of tungsten carbide, these saws are twice the strength of steel and last a long time. The company used computer tech to balance these miter saw blades, so you’ll finish projects with excellent accuracy.

We love these blades for our woodworking projects, but they don’t have much use beyond wood. Don’t try it on materials like laminate – the saw can start smoking! This product is also made in China, so you may need to sharpen the blades before the first use, thanks to the long journey.

  • The tungsten carbide holds the edge and keeps the blades sharper longer.
  • The blades are computer balanced for better accuracy and smoother finishing.
  • They have reduced vibration technology.
  • It comes with a 60- and a 32-tooth blade for different projects.
  • The blades may need sharpening before the first use.
  • It doesn’t work well with laminate material.

Makita A-93681 10-Inch 80 Tooth Micro Polished Miter Saw Blade

Makita makes a sharp 80-tooth miter saw using micro-grain carbide. The fully hardened steel saw plates create clean cuts and fine crosscutting. The 80 teeth create smoother cuts in wood with minor chipping, though it generates a lot of dust while working. However, 80-tooth saws are the best for miter saw jobs.

This Makita saw blade is one of the longest-lasting on the market. The blade stays sharp, and you won’t notice a lot of degradation. If you’re new to woodworking, make sure not to put too much pressure or cut too hard with this blade. The blue paint lining the inside can rub off onto your material.

  • The 80 teeth create super clean cuts.
  • Fully hardened steel is excellent for crosscutting.
  • Hand tensioned plates are balanced.
  • Micro-grain carbide lasts a long time.
  • Blue paint rubs off on material if you press too hard.
  • It smokes and burns thick wood, so it’s best to stick with thinner boards.

Forrest WW10407125 Woodworker II

This Forrest 40-tooth miter saw blade is a classic woodworking blade. It provides excellent accuracy thanks to its precisely positioned teeth. The hand-tensioned carbide teeth help create such a smooth cut, and you’ll forget you haven’t sanded it already. The blade is also quiet while working.

Forrest sharpens their blades for customers. When yours becomes dull, send it back to them, and they will do the sharpening for you. While it’s an extra cost, they will also repair the blade tips if needed. It’s an excellent service that costs less than buying a new blade, ensuring that your Forrest Woodworker II lasts a long time.

  • The blade is quiet while running.
  • Precisely positioned teeth give you more accurate and smoother cuts.
  • Send the blade to Forrest for sharpenings and repairs for a cost less than buying a new blade.
  • Arrives packaged safely and preserved in oil to prevent damage while shipping.
  • Forrest gives recommendations for what type of wood, thickness, and cut types are ideal for each blade. Going against these recommendations can damage the blade.
  • Sending the blade back for sharpening and repairs can take a few weeks, leaving you without a blade.

Craftsman 10-Inch Miter Saw Blade, Combo Pack

Craftsman sells a 10-inch miter saw blade combo pack that comes with a 24- and a 60-tooth blade to customize your woodworking station to whatever project you take on. The induction-brazed carbide tips are durable, and the heat-treated plates ensure there’s no warping while you work. These blades are also corrosion-resistant, so you don’t need to worry about rusting.

While this is mainly a woodworking blade, it’s so strong that you can cut through nails and won’t severely damage the teeth. They’re ultra-sharp, providing clean cuts and preventing smoking. If you don’t do heavy work with them, expect these Craftsman blades to last.

The technology used to make these blades ensures that they work quieter than other tools while efficiently cutting. They won’t smoke or burn wood and can withstand heavy pressure.

  • Strong teeth can cut through nails without severe damage.
  • It comes with a 24- and a 60-tooth blade for various projects.
  • Heat-treated plates prevent warping.
  • Corrosion-resistant carbide tips won’t rust.
  • The blades come stuck together with adhesive, which is challenging to scrape off.
  • They have smooth cuts but create a lot of dust.

Freud D1050X Diablo 10-Inch Blade

This Freud Diablo 50-tooth miter saw blade is excellent for various projects, particularly ripping and crosscutting wood. Each set of five teeth is separated by a gullet, giving space for chip removal when you’re ripping wood or composites. The closely grouped teeth sections create smooth and accurate results while crosscutting.

This blade features a laser-cut stabilizer and heat expansion slots. The stabilizer keeps vibration down and reduces heat products, preventing warping. The expansion slots let the blade expand when heat builds up, so every cut you make stays straight.

The Diablo blade features a tri-metal shock-resistant blazing, which allows the carbide tips to withstand heavy pressure.

  • The gullet between every set of five teeth helps remove chips while ripping.
  • The teeth are closely grouped for more accuracy.
  • A laser-cut stabilizer reduces vibrations and cools down the blade.
  • The expansion slots let the blade expand with heat buildup, keeping cuts straight.
  • The blade is very loud while working.
  • Not ideal for challenging projects.

Concord Blades WCB1000T030HP General Purpose Blade

This Concord Blades 30-tooth saw is ideal for hard and softwood projects. This blade can rip and crosscut hardwood up to 3.5 inches thick and softwood up to an inch thick. The kerf is thin, allowing for smooth cutting and minimal waste. If you have laminate trimming to do, this blade cuts through the material with ease, unlike others on this list.

While this blade provides significant cuts for your woodworking, it’s not a long-lasting tool. The teeth are reasonably thin and wear out quickly over time. It’s an excellent general purpose blade for all your miter saw needs.

Make sure you install it on the saw correctly and use the right saw. Improperly placing the blade will make it wobble. Wobbling blades counteract accuracy and will ruin the material you’re cutting, not to mention chip the blade itself.

  • It cuts up to 3.5-inch thick hardwood and one-inch thick softwood.
  • Thin kerf gives a smooth cut and minimizes waste.
  • Can cut trim laminate material.
  • Can work on saws with RPM up to 5,500.
  • Blade wears out quickly.
  • It chips wood after several cuts.

Makita B-66977 Carbide-Tipped Max Efficiency Miter Saw Blade

This sleek blue and black Makita blade features 80 teeth and up to 100 percent faster cutting than similar blades. It can produce up to 30 percent more cuts thanks to the thin kerf and carbide-tipped design that lessens drag and reduces waste.

The teeth are specially designed to reduce pressure and load on the blade while cutting. The number of teeth is ideal for miter saw projects because it provides the perfect amount of power and speed. Combined with the high-grade tungsten carbide, this blade is meant to last. It works well for cutting all sorts of woods and thicknesses.

The blade features ATAFR (alternate top alternate face with raker) carbide tips for smooth, quick cuts. With four alternating angles followed by a flat grind tooth, you’ll notice a crosscut so soft there is no sanding needed.

  • Eighty teeth provide faster cutting than other blades.
  • Thin kerf and carbide-tipped design lessens drag and reduces waste.
  • Special ATAFR tips offer smooth and quick cuts.
  • Withstands cutting laminate and other rigid materials.
  • The cut finish may worsen as the blade wears down over time.

Freud 10" x 24T Heavy-Duty Rip Blade

This Freud 24-tooth heavy-duty blade is colorful and intense. It comes in a bright red color and features large, flat grind teeth that eliminate the need for sanding. The micro grain carbide blade is high-density and is made for smoothing out heavy-duty ripping projects. Even if your table saw is weak, and your wood is tough, this blade will cut through.

The nonstick perma-shield coating reduces drag, prevents rust, and reduces pitch buildup, helping the blade last longer. This Freud miter saw blade also features laser-cut anti-vibration slots, which reduce vibrations and movements, further extending the blade’s life and providing greater accuracy and cleaner cuts.

Freud loves to produce blades with a unique red design on the side, but it can cause problems. The red paint will rub off on the wood if you apply too much pressure while cutting.

  • They are made for heavy-duty ripping projects and cuts through the most challenging wood.
  • Large, flat teeth finish the cut - no sanding needed.
  • Nonstick perma-shield coating prevents corrosion and pitch buildup.
  • Laser-cut anti-vibration slots reduce movement for greater accuracy.
  • This blade can burn thicker woods.
  • It doesn’t work well for projects beyond ripping.

DEWALT 10-Inch Miter Saw Blade, Two-Pack

If your project requires fine crosscutting, this DEWALT 60-tooth miter saw blade would get the job done. It features a thin kerf for faster cutting. The computer-balanced plates provide a better finish thanks to reduced vibration and greater precision.

The teeth on this blade have a wedged shoulder design. It puts more steel behind each tooth tip, making the blade last longer and giving you better accuracy while cutting, which is especially important for fine crosscutting projects. This pack comes with two blades, so you can use it on two saws or switch them out when one needs sharpening.

While this blade is excellent for cutting various types of wood, it doesn’t do well with cutting materials like laminate. The carbide is too weak to handle such rigid materials, and it’ll chip easily.

  • Thin kerf allows for faster cutting.
  • Computer-balanced plates offer a better finish, reduced vibration, and greater precision.
  • Wedged shoulder design adds life to the teeth.
  • It comes with two blades, so you’re never out of a fine crosscutting tool
  • Yellow paint rubs off on the wood.
  • Very thin blades are not suitable for heavy-duty projects.

Freud 10" x 40T Next Generation Premier Fusion General Purpose Blade for Crosscuts

Freud’s Next Generation Fusion Blade was designed for general purposes, particularly when crosscutting. It features 40 teeth and a 30-degree Hi-ATB, perfect for cutting through materials like plywood and melamine. The double-side grind design gives you polished cuts without sanding, and the high-density carbide gives you a sharper edge for a flawless finish.

This blade also has an axial shear face grind that slices through materials with little to no resistance. It features laser-cut anti-vibration slots and a perma-shield nonstick coating, preventing rust and helping the blade last.

While the bright red design is eye-catching, it can cause some problems for woodworking projects. If you apply too much pressure while using this blade, the red can rub off onto your wood.

  • A double-side grind design creates polished cuts.
  • Axial shear face grind has little to no resistance when slicing through various materials.
  • Laser-cut anti-vibration slots reduce movement for more accuracy.
  • Perma-shield nonstick coating reduces corrosion and prevents rust.
  • Blade cuts poorly with a riving knife (which adds safety).
  • It loses the efficiency of thick woods.
  • The red paint rubs off on wood.

What to Know About 10-Inch Miter Saw Blades

What makes miter saw blades so special? Keep reading to learn more about these essential woodworking tools.

What’s the Difference Between a 10- and a 12-Inch Miter Saw Blade?

It’s no secret that miter saws are an excellent tool for angled cutting, whether you’re making cross cuts or bevels. But what’s the difference between a 10- and a 12-inch miter saw blade, the two most popular on the market?


The most evident difference between the two saws is the blade size. A 10-inch blade is 10 inches long, while a 12-inch is 12 inches long.


The size of the miter saw blade can significantly affect its speed. The 10-inch blade has a smaller radius, so it can rotate faster, or have a higher RPM than the 12-inch miter saw blade.

The best 10-inch miter saw blade runs at 5,000 RPM, producing smooth, clean cuts. Twelve-inch blades typically rotate at 4,000 RPM, ideal for more significant cuts that you don’t mind if they’re choppy.


There’s also a significant power difference between the 10- and 12-inch miter saw blades. Twelve-inch blades have more power, making them better for heavy-duty projects or cutting thick wood.

Why Is a 10-Inch Miter Saw Blade Right For You?

There are numerous advantages to using a 10-inch miter saw blade, from speed to versatility. Here are a few:

  • The smaller surface applies more pressure while cutting. 
  • It spins faster than larger blades, making it easy to cut various materials. 
  • It’s easy to store and transport with the saw.

Choosing the Right Blade

There are numerous advantages to using a 10-inch miter saw blade, from speed to versatility. Here are a few:

  • The smaller surface applies more pressure while cutting. 
  • It spins faster than larger blades, making it easy to cut various materials. 
  • It’s easy to store and transport with the saw.

Blade Thickness

Blade thickness is a vital factor when considering a miter saw blade. Thin blades cut faster, but thick blades last longer. Typically, manufacturers will describe the blade thickness using the kerf size or how thick the blade cuts.

Number of Teeth

There are numerous tooth counts on 10-inch miter saw blades, and each provides a slightly different woodworking experience. For miter saw blades, a higher tooth count will create smoother cuts. The best blades for miter saw jobs have 80 teeth.

The Gullet

The gullet is the space between the blade’s teeth. While it’s a small part of a blade, it serves an important function. It helps remove dirt while cutting, keeping your workspace clean, and avoiding a mess during your cutting process. If you plan on crosscutting a lot with your miter saw, a blade with smaller gullets is ideal.

Saw Tooth Designs

Miter saw blades come with various tooth designs ideal for different projects. Many more saw tooth designs than those listed in the products above, and each one affects the way the blade cuts into materials. These are the most common saw tooth designs:


Flat teeth are excellent for raking and efficiently removing material as well as ripping hard and softwood.

Alternate Top Bevel (ATB)

An ATB design features teeth that alternate between left- and right-sided bevels. It gives you a very smooth cut, especially when crosscutting natural wood and plywood.

High Alternate Top Bevel (Hi-ATB)

A Hi-ATB blade is similar to an ATB, except the bevel angles are a bit higher. This tooth design is ideal for fine crosscutting, especially materials coated with melamine.

Alternate Top Alternate Face (ATAF)

The ATAF tooth design features alternating bevel angles that cut at varying angles and lengths. It’s an ideal crosscutting blade for natural wood and brittle materials.

Alternate Top Alternate Face Raker (ATAFR)

ATAFR is a more modern design that features a repeated group of five teeth with a gullet between each group. There are four ATB teeth and one flat tooth in each group. The flat tooth leaves a smooth surface after the four ATB teeth efficiently crosscut the material.

Cleaning a Miter Saw Blade

Cleaning and maintaining your miter saw blade ensures it keeps working and lasting for a long time. The cleaning process is relatively straightforward:

  • Remove the blade from the saw and soak it in a bowl of warm water diluted with all-purpose cleaner for a few minutes. 
  • Remove the blade from the water and scrub out stubborn spots. Place it back in the water and shake off extra dirt. 
  • Dry the blade thoroughly with a cloth. Most durable blades have an anti-corrosion surface, but it’s still essential to dry your blade completely to avoid rusting.

Outside of regularly cleaning with water, be sure to wipe your blade off with a dry cloth after each use. This will keep it clean and prevent any debris from damaging the blade or affecting your cuts.

Leave a Comment